This section provides an overview of out-of-band management using Cisco CIMC for Cisco UCS servers running Qumulo Core.
Cisco UCS C-Series servers include Cisco Integrated Management Controller (CIMC) for out-of-band management. CIMC allows you to monitor, manage, and troubleshoot servers remotely, independent of the operating system.
Overview
CIMC enables you to:
- Power on, power off, and reboot servers remotely
- Access the server console via KVM
- Mount virtual media for OS installation
- Monitor hardware health and sensors
- Update firmware
Wiring the Out-of-Band Management Network
Connect all CIMC ports to a dedicated out-of-band management switch, separate from your data network. This ensures management access even if the data network experiences issues.
The CIMC port is located on the rear of each Cisco UCS C-Series server.
Note
CIMC credentials are separate from Qumulo Core administrative credentials. Manage CIMC access independently according to your organization's security policies.
CIMC credentials are separate from Qumulo Core administrative credentials. Manage CIMC access independently according to your organization's security policies.
Cisco CIMC Documentation
For detailed instructions on configuring and using CIMC, refer to the official Cisco documentation: