Drive Bay Mapping in Fujitsu PRIMERGY RX2540 M7 Nodes

This section explains the drive bay mapping in Fujitsu RX2540 M7 nodes.

Your Fujitsu RX2540 M7 chassis contains 12 or 8 HDDs in the front, 4 NVMe drives in the back, and 2 mirrored NVMe boot drives in internal M.2 expansion slots. The following is the mapping for the drives.

Note
To determine the drive configuration for your node, see Technical Specifications.

Front HDD Drives

For more information, see To Replace an HDD.

48TB and 144TB Nodes

In 48TB and 144TB Nodes, all drive bays are populated.

Fujitsu PRIMERGY RX2540 M7 Front HDD Bay Mapping (48TB and 144TB)

96TB Nodes

In 96TB Nodes, some drive bays are empty.

Fujitsu PRIMERGY RX2540 M7 Front HDD Bay Mapping (96TB)

Back NVMe Drives

For more information, see To Replace an NVMe Drive.

Note
Because the expansion bays are universal, your node might contain labels such as HDD0 for the NVMe slots.

Fujitsu PRIMERGY RX2540 M7 NVMe Drive Bay Mapping

Internal NVMe M.2 Boot Drive

The boot drives are located at the M.2 expansion slot on an interposer (controller) board. For more information, see To Replace an NVMe M.2 Boot Drive.

Follow the instructions in the Fujitsu Upgrade and Maintenance Manual: Slots for M.2 SSDs on the M.2 interposer board (p. 211).