This section provides technical specifications for Fujitsu PRIMERGY RX2540 M7 node types.
Note
On hybrid platforms, SSDs act as a cache. You can determine the size of these drives in either of the following ways:
On hybrid platforms, SSDs act as a cache. You can determine the size of these drives in either of the following ways:
- Physically examine the SSD drive.
- In the Qumulo Core Web UI, click Cluster > Overview, then click one of the node names in the table. The SSD drive size is listed on the node detail page.
| Fujitsu PRIMERGY RX2540 M7 240 TB (Active or General Purpose) | Fujitsu PRIMERGY RX2540 M7 144 TB (Active or General Purpose) | Fujitsu PRIMERGY RX2540 M7 96 TB (Active or General Purpose) | Fujitsu PRIMERGY RX2540 M7 48 TB (Active or General Purpose) | |
|---|---|---|---|---|
| Connectivity Ports (NIC) | 2 × 25 GbE (1 × Intel E810 NIC) | |||
| Management Ports (BMC) | 1 × 1 GbE Base-T (RJ45) | |||
| Solid State Storage Media (Cache) | 4 × 1.6 TB NVMe | |||
| HDD Storage Media | 12 × 20 TB | 12 × 12 TB | 8 × 12 TB | 12 × 4 TB |
| Boot Drives (Mirrored) | 2 × 960 GB M.2 SATA (RAID 1) | |||
| CPU | 2 × Intel Xeon Silver 4410Y CPU @ 2.70 GHz | |||
| Memory | 128 GB (32 GB × 4) | |||
| Power Supply | 2 × 1,600 W Power Supplies | |||
| Dimensions (H × W × D) | 3.4" × 17.1" × 34.4" (8.6 mm × 434 mm × 873.8 mm) | |||
| Weight | 70.5 lbs (32 kg) | |||
| Power Requirements | 100–240 V, 50/60 Hz | |||
| Typical Power Consumption | 520 W | |||
| Typical Thermal Rating | 1,720 BTU/hr | |||
Maximum Power Consumption |
763 W | |||
| Maximum Thermal Rating | 2,604 BTU/hr | |||
| Operating Temperature | 50°F–95°F (10°C–35°C) | |||
| Non-Operating Temperature | -22°F–140°F (-6°C–60°C) | |||
| Operating Relative Humidity | 8%–85% (non-condensing) | |||
Non-Operating Relative Humidity |
5%–95% (non-condensing) | |||