This section explains how to configure Integrated Lights Out (iLO) on HPE ProLiant DL325 Gen10 Plus nodes.


To configure the iLO port, you must have root access to the client-facing network through SSH. For example, you can run the sudo -s command.

How the iLO Port Works

Your node provides iLO support for out-of-band maintenance access even when the node is plugged in but powered off. The following diagram shows the location of the iLO port.

The location of the iLO port on the HPE ProLiant DL325 Gen10 Plus node

Your nodes receive DHCP address assignments by default. When you configure a node’s iLO port, you can access the node by using the IP address (that the DHCP server assigns to the node) and a browser that supports HTML5, Java, or .NET.

To access iLO configuration from the BIOS System Utilities menu, press F9.

The default username, password, and DNS name are printed on a serial label pull tab attached to the node.

iLO Configuration

To configure the iLO port, you must use ipmitool. For more information, see the following HPE resources: