This section explains how to rack Quiver 1UA Gen1 nodes in a data center.
Inserting the Chassis into the Server Rack
Important
- We strongly recommend using a server lift or that two people perform this task.
- If you install the Quiver 1UA Gen1 245 TB node type, ensure that the node cabling has sufficient slack to allow you to reach the internal storage bays.
To Insert a Chassis without Drives into a Standard Server Rack
For nodes without drives, follow the Tool-Less Friction Rail Kit Installation Guide in the ASUS documentation.
To Insert a Chassis with Internal Drives into a Deep Server Rack
For nodes with drives in internal storage bays, you can purchase the optional 1.2m Half Extension Ball Bearing Type Rail Kit together with the Cable Management Arm. These two items replace the Tool-Less Friction Rail Kit.
Note
To permit access to the internal storage bays, leave clearance at the top of the chassis.
To permit access to the internal storage bays, leave clearance at the top of the chassis.
Removing the Chassis from the Server Rack
Perform the steps for inserting the chassis in reverse order.