This section explains the drive bay mapping in Quiver 2UH Gen2 nodes.
The Quiver 2UH Gen2 chassis contains 24 HDD drives in internal drawers, 6 NVMe drives at the back of the node, and one boot drive in an internal M.2 expansion slot.
Tip
To check that the node has detected all of the drives, run the following command:
/opt/MegaRAID/storcli/storcli64 /c0 show | \ grep "Physical"- To show the number of detected NVMe drives, run the
nvme listcommand.
Internal HDD Drives
The HDD drives in the Quiver 2UH Gen2 chassis are located in three drawers.
Drawer 1 (Drives 1-8)
Drawer 2 (Drives 9-16)
Drawer 3 (Drives 17-24)
Rear NVMe Drives
The NVMe drives in the Quiver 2UH Gen2 are located at the back of the node.
NVMe M.2 Boot Drive
The boot drive is located at the M.2 expansion slot at Riser Slot 1.
